Shower Head Installation Atlanta - Professional Shower Head Replacement & Upgrade Services

Fixed Mount Shower Heads: Standard Fixed Shower Head, Ball-Pivot Adjustable Head, High-Pressure Shower Head, WaterSense Certified Shower Head, Air-Injection Shower Head, Filtered Shower Head

Rain and Oversized Shower Heads: Standard Rain Shower Head (8-10 inch), Large Rain Shower Head (12 inch), Extra-Large Rain Shower Head (16-18 inch), Ceiling-Mount Rain Head, Recessed Ceiling Rain Head, LED Rain Shower Head

Handheld Shower Heads: Basic Handheld Shower Head, Slide Bar with Handheld, Multi-Function Handheld, High-Flow Handheld, Filtered Handheld Shower Head, Pet-Wash Handheld

Dual Shower Head Systems: Fixed Plus Handheld Combo, Dual Fixed Shower Heads, High-Low Dual System, Separate Shower Head System

Shower Panels and Systems: Shower Panel Tower, Body Jet System, Steam Shower System, Digital Shower System

Extended and Specialty Arms: Standard Shower Arm Extension, S-Curve Extension Arm, Gooseneck Long Arm, Adjustable Shower Arm, Ceiling-Drop Arm

Initial Consultation and Planning: Contact customer, discuss current shower head issues and desired upgrade, verify water pressure and shower arm type, provide installation time estimate, confirm appointment.

Technician Arrival and Assessment: Inspect existing shower head and arm, test water pressure, assess valve type, review new shower head components, prepare tools and materials.

Removing Old Shower Head: Turn off shower water, protect surfaces, remove old head using proper technique, clean arm threads, inspect arm for damage or corrosion.

Shower Arm Replacement (if needed): Remove old arm, install new arm with Teflon tape sealing, position at correct angle, install escutcheon plate.

Standard Fixed Head Installation: Apply Teflon tape, hand-thread and tighten to correct angle, test for leaks, verify spray patterns and water pressure.

Handheld Shower Head Installation: Mount slide bar with drilling and anchoring, connect flexible hose, attach handheld head, test all heights and spray settings.

Rain Shower Head Installation: Install arm extension or gooseneck arm for proper overhead positioning, mount rain head, adjust angle for vertical rainfall, test full coverage.

Dual Shower Head System: Install diverter adapter, connect fixed head and handheld hose, test both diverter positions and verify no leaks.

Shower Panel Installation: Test water pressure, mount panel brackets into studs or anchors, connect supply hose, test all functions (rainfall, body jets, handheld).

Final Testing and Customer Walkthrough: Run shower 3-5 minutes, inspect all connections, demonstrate all features, explain care and maintenance, confirm customer satisfaction.

Connection Specifications:
- Supply Thread Size: Standard 1/2-inch NPT (National Pipe Thread) - universal in US homes
- Connection Type: Threaded female inlet on shower head to male shower arm
- Thread Sealant: 2-3 wraps PTFE (Teflon) pipe thread tape, applied clockwise
- Tightening: Hand-tight plus 1/4 to 1/2 turn with wrench (no over-tightening)

Flow Rate Specifications:
- Standard Shower Heads: 2.0-2.5 GPM (gallons per minute)
- WaterSense Certified Heads: Maximum 2.0 GPM (EPA certified water-saving)
- High-Pressure Heads: 1.5-2.5 GPM with pressure-amplifying nozzle design
- Rain Shower Heads (8-10 inch): Typically 1.5-2.5 GPM
- Rain Shower Heads (12-18 inch): Varies 1.5-3.0 GPM depending on nozzle count
- Filtered Shower Heads: 1.5-2.0 GPM (slight flow reduction due to filtration)
- Shower Panels with Body Jets: 3.0-8.0 GPM total (multiple outlets)

Water Pressure Requirements:
- Minimum Recommended: 20 PSI (anything lower results in poor performance)
- Optimal Performance Range: 40-60 PSI (standard residential pressure)
- Maximum Recommended: 80 PSI (above 80 PSI requires pressure regulator)
- Rain Heads (large format): Perform best at 50+ PSI for satisfying coverage
- Body Jet Systems: Require minimum 45 PSI for adequate performance
- High-Pressure Amplifying Heads: Designed for 20-45 PSI low-pressure homes

Shower Arm Specifications:
- Standard Wall Arm Thread: 1/2-inch NPT male inlet, 1/2-inch NPT male outlet
- Standard Arm Length: 6-8 inches
- S-Curve Extension Arms: Add 12-15 inches of projection
- Gooseneck Arms: Add 18-24 inches of height/projection
- Shower Arm Diameter: 1/2-inch IPS (Iron Pipe Size) standard
- Weight Rating: Standard arms support up to 5 lbs (verify for heavy rain heads)

Step 1 - Schedule: Call (678) 656-9246 or book online. Describe current shower head issues and desired upgrade.

Step 2 - Technician Arrival: Licensed plumber arrives within appointment window, reviews scope, and inspects existing shower head and arm.

Step 3 - Assessment: Test water pressure, inspect arm condition and threads, verify new shower head components are on-site.

Step 4 - Remove Old Head: Safely remove existing shower head using proper technique. Inspect arm threads for damage or corrosion.

Step 5 - Arm Replacement (if needed): Replace corroded or wrong-angle shower arms with new arm properly sealed and positioned.

Step 6 - Install New Shower Head: Apply Teflon tape to arm threads, install new shower head at correct angle, hand-tighten then snug with wrench.

Step 7 - Additional Components: Mount slide bars, install diverters for dual systems, connect handheld hoses, or mount shower panels as required.

Step 8 - Leak Testing: Turn water on slowly, inspect all connections, run shower for full test cycle verifying no leaks.

Step 9 - Function Testing: Test all spray pattern settings, verify handheld slide bar operation, confirm water pressure meets expectations.

Step 10 - Customer Walkthrough: Demonstrate new shower head operation, spray settings, and any special features. Ensure complete satisfaction.

Step 11 - Cleanup: Remove old shower head, clean shower area, leave bathroom ready for immediate use.

Technician Preparation - What We Bring:
- Adjustable wrenches and strap wrenches for removing old shower heads
- Teflon pipe thread tape for leak-free connections
- Penetrating oil (PB Blaster) for corroded connections
- Wire brush for cleaning arm threads
- Drill with tile bits for slide bar mounting
- Anchors and fasteners for various wall types
- Torpedo level for plumb slide bar installation
- Pressure gauge for testing home water pressure
- Towels and drop cloth for surface protection
- Thread sealant and silicone for specialty connections
- Channel-lock pliers and pipe wrenches
- Replacement Teflon tape (multiple widths)

Tools for Specific Installations:
- Slide bar mounting kit with drill bits
- Diamond tile bits for drilling mounting holes
- Pipe thread cleaner/chaser for corroded arms
- Extension arms (S-curve, gooseneck) commonly in stock
- Diverter adapters for dual head system setup

Customer Preparation Checklist:
- Have new shower head and all components on-site
- Clear shower area and remove personal items
- Know your water pressure if possible (helps with product selection)
- Have desired arm extension on-site if upgrading to rain head
- Note any current issues: leaking, low pressure, corroded arm

Pre-Installation Testing:
- Water pressure measurement: Test existing home water pressure with calibrated gauge. Standard 40-60 PSI normal. Note pressure for shower head recommendations.
- Existing shower head assessment: Run existing head briefly noting flow rate, spray patterns, and any leaks at arm connection.
- Arm thread inspection: Visually inspect shower arm threads for corrosion, damage, or mineral buildup before removing old head.
- Valve type identification: Confirm pressure-balance or thermostatic valve type - affects diverter compatibility.

Connection and Installation Testing:
- Thread engagement verification: Visually confirm Teflon tape applied properly and threads fully engaged before tightening.
- Proper tightening confirmation: 1/4 to 1/2 turn past hand-tight for fixed heads. Snug with wrench for hose connections.
- Slide bar plumb check: Verify slide bar vertical with torpedo level before drilling tile mounting holes.
- Anchor seating verification: Confirm wall anchors seated properly and slide bar brackets secured firmly.

Post-Installation Leak Testing:
- Slow water restoration: Open supply valves slowly, watching for leaks at arm connection during initial pressurization.
- Connection inspection: Inspect arm-to-head connection, hose connections, and diverter connections with white paper towel.
- Full-flow running test: Run shower at full flow for 3-5 minutes. Re-inspect all connections for weeping or active leaks.
- Spray pattern testing: Test all spray pattern settings on multi-function heads.
- Diverter testing: For dual systems, test diverter switching between fixed head and handheld head.
- Slide bar function: Verify handheld holder slides smoothly and locks at desired positions.
- Flexible hose check: Confirm hose does not kink in any position of the slide bar range.
- Water temperature verification: Confirm hot and cold water flow correctly through new shower head.

Gwinnett County: Lawrenceville, Duluth, Norcross, Lilburn, Snellville, Grayson, Loganville, Dacula, Buford, Suwanee, Sugar Hill, Peachtree Corners, Berkeley Lake, Rest Haven, Braselton

DeKalb County: Decatur, Tucker, Stone Mountain, Clarkston, Avondale Estates, Chamblee, Doraville, Dunwoody, Brookhaven, Lithonia, Pine Lake, Stonecrest

Cobb County: Marietta, Smyrna, Kennesaw, Acworth, Austell, Powder Springs, Mableton, Fair Oaks, Vinings

Fulton County: Atlanta, Alpharetta, Roswell, Sandy Springs, Johns Creek, Milton, East Point, College Park, Fairburn, Hapeville, Mountain Park, Union City

Forsyth County: Cumming

Q: What's the difference between a standard shower head and a rain shower head?
A: Standard shower heads mount at face level (72-78 inches), spray at an angle toward the body, and offer concentrated spray patterns. Rain shower heads mount overhead (80-90 inches), spray straight down like rainfall, and deliver a gentle immersive experience. Rain heads require a longer arm or ceiling mount for proper overhead positioning. For maximum luxury, combine a ceiling-mount rain head with a standard or handheld head for a choice of experience.

Q: Can I install a rain shower head on my existing shower arm?
A: Usually an arm upgrade is required. Standard shower arms (8-12 inches) position a rain head at chest or face level rather than overhead. You'll need an S-curve arm (adds 12-15 inches), gooseneck arm (adds 18-24 inches), extension arm (adds 6-12 inches), or ceiling-drop arm for proper overhead placement. The rain head center should be 10-15 inches from the wall so water falls within the shower area.

Q: Will a rain shower head reduce my water pressure?
A: It depends on your current pressure. At 50-80 PSI, the total flow is similar to a standard head but dispersed over a larger area creating a gentler experience. At under 40 PSI, rain heads perform poorly since low pressure spread over a large surface creates very weak flow. We test your water pressure on arrival and advise on realistic expectations for your home.

Q: How do I add a handheld shower head without removing my existing fixed head?
A: Use a diverter adapter. It threads onto your existing shower arm, your fixed head threads onto the diverter, and the handheld hose connects to the second port. A simple diverter ($85-$135 installed) switches between heads and is the most cost-effective solution. Full two-valve dual systems ($375+) are available for those who want full pressure to both heads simultaneously.

Q: My shower has low water pressure - can a new shower head fix it?
A: Sometimes. If your old head is clogged with mineral deposits or has a restrictive flow limiter, a new head will significantly improve your shower. However, if home water pressure is genuinely low (under 35-40 PSI) due to corroded pipes or supply issues, a new head won't solve it. Pressure-amplifying heads (Speakman, Delta H2Okinetic) can improve perceived pressure through nozzle design. We test pressure on arrival and give honest advice.

Q: What is a filtered shower head and do I need one?
A: Filtered shower heads remove chlorine, heavy metals, and sediment from shower water. Atlanta municipal water contains chlorine that vaporizes in hot shower steam. Homeowners with sensitive skin, eczema, color-treated hair, or well water often benefit most. KDF-55 carbon filters handle chlorine and heavy metals; Vitamin C filters neutralize chloramine. Filter heads install identically to standard heads and cartridges need replacement every 6 months.

Ready to upgrade your shower experience? From a simple swap to a complete spa system, our licensed plumbers deliver professional installation and a shower you'll love every day.

Phone: (678) 656-9246
Email: arcitechlogistics@gmail.com

Serving Gwinnett County, DeKalb County, Cobb County, Fulton County, and Forsyth County since 2015. Professional shower head installation, same-day service available. Call now to schedule your shower upgrade!