Professional Telescopic Downdraft Installation - Atlanta Metro

Telescopic Downdraft Installation
Downdraft Replacement
Wolf Downdraft Installation
Thermador Downdraft Installation
Jenn-Air Downdraft Installation
KitchenAid Downdraft Installation
Best by Broan Downdraft Installation
Countertop Integration and Cutout Work
Ductwork Connection
Electrical Connection
Cabinet Integration
CFM Testing and Ventilation Performance Verification
Old Downdraft Removal and Haul Away

Professional installation by a licensed technician
Safe disconnection and removal of existing downdraft system
Mounting of new telescopic downdraft unit in countertop
Ductwork connection to existing ventilation (same venting direction)
Electrical connection to dedicated 110V circuit
Telescopic rise and lower mechanism testing
CFM ventilation performance verification
All speed controls and settings testing
Work area cleanup and packaging removal
Installation warranty on workmanship
Optional haul away of old downdraft system for $25

Venting Options:

Ducted (Outside) Venting - RECOMMENDED
Best performance and odor/smoke removal
Requires existing ductwork to exterior
CFM performance matches rated specifications
No filter maintenance (grease filter only)
Cannot be changed during standard installation without additional cost

Recirculating (Inside) Venting
Alternative when ductwork not available
Uses charcoal filters to clean air
Reduced CFM performance (typically 30-40% less)
Requires regular charcoal filter replacement
Cannot be changed during standard installation without additional cost

Downdraft vs. Traditional Hood:

Advantages of Telescopic Downdrafts:
Unobstructed sight lines across kitchen island
Clean, minimalist appearance when retracted
Ideal for open-concept kitchen designs
Saves overhead space
Works with low ceilings

Limitations Compared to Hoods:
Less effective for gas cooking (heat rises naturally)
Lower CFM ratings than high-end hoods
More expensive than comparable hoods
Requires cabinet space for motor/blower
Requires ductwork routing under floor or in basement

CFM Range: 300-1000+ CFM depending on model
Electrical: Dedicated 110V circuit (typically 15-20 amp)
Width Options: 12 inch, 15 inch, or 30 inch
Rise Height: 8-14 inches above countertop when activated

Step 1 - Pre-Installation Assessment: Verify countertop opening dimensions, ductwork location, and electrical circuit at your Atlanta metro home.

Step 2 - Delivery and Unpacking: Carefully unbox and inspect new downdraft system for shipping damage.

Step 3 - Service Disconnection: Safely disconnect electrical and ductwork from existing downdraft system.

Step 4 - Old Downdraft Removal: Remove existing telescopic downdraft from countertop opening.

Step 5 - Countertop Preparation: Clean and prepare the opening, verify dimensions match new unit.

Step 6 - Cabinet Access: Access under-counter area for motor and blower installation.

Step 7 - Motor and Blower Mounting: Secure downdraft motor and blower assembly in cabinet.

Step 8 - Telescopic Unit Installation: Install pop-up downdraft unit in countertop opening.

Step 9 - Ductwork Connection: Connect downdraft to existing ductwork (same venting direction only).

Step 10 - Electrical Connection: Connect to dedicated 110V electrical source.

Step 11 - Rise and Lower Testing: Test telescopic mechanism for smooth operation.

Step 12 - Ventilation Testing: Test all fan speeds and verify CFM performance.

Step 13 - Control Panel Testing: Test all controls, settings, and display functions.

Step 14 - Cleanup and Haul Away: Remove old downdraft system and all packaging materials (haul away optional for $25).

Step 15 - Customer Demonstration: Show operation, speed settings, and maintenance requirements.

Clear a path from the street to the kitchen wide enough to accommodate the downdraft system

Clear cabinet and counter space around the installation area

Empty cabinets where the downdraft motor and blower will be installed

Provide access to the electrical panel and ductwork connections

Know the location of existing ductwork and whether it vents inside recirculating or outside ducted

Have an adult 18 or older available for the entire appointment

Keep purchase receipt, warranty information, and installation manual available

Verify countertop cutout dimensions match the new downdraft unit

After installation, we thoroughly test:

Telescopic Rise/Lower - Verify smooth operation of pop-up mechanism

Motor Operation - Test motor function at all speed settings

CFM Performance - Verify airflow meets manufacturer specifications (typically 300-600+ CFM)

Speed Controls - Test all fan speed settings from low to high

Control Panel - Verify all buttons, touch controls, and display function properly

Timer Function - Test automatic shutoff timer (if equipped)

LED Lighting - Test integrated task lighting (if equipped)

Filter Status - Verify filter installation and filter indicator (if equipped)

Sound Level - Verify normal operating noise levels

Damper Operation - Test backdraft damper opens/closes properly

Remote Control - Test remote control function (if equipped)

Gwinnett County: Lawrenceville, Duluth, Suwanee, Buford, Norcross, Lilburn, Snellville, Dacula, Grayson

DeKalb County: Decatur, Dunwoody, Tucker, Stone Mountain, Chamblee, Brookhaven

Cobb County: Marietta, Smyrna, Kennesaw, Acworth, Powder Springs, Austell

Fulton County: Atlanta, Alpharetta, Sandy Springs, Roswell, Johns Creek, Milton

Forsyth County: Cumming

Q: How long does telescopic downdraft installation take in the Atlanta area?
A: Most telescopic downdraft installations take 2-4 hours, including disconnection of old unit, installation of new downdraft, ductwork connection, electrical connection, testing, and cleanup. Installations requiring ductwork modifications or cabinet work may take 4-6 hours.

Q: What is a telescopic downdraft ventilation system?
A: A telescopic downdraft is a pop-up ventilation system that rises from the countertop behind your cooktop when needed and retracts when not in use. It is ideal for island cooktops where traditional overhead hoods are not desired or possible.

Q: Can you install any brand of telescopic downdraft?
A: Yes! We install all major brands including Wolf, Thermador, Jenn-Air, KitchenAid, Best by Broan, and other manufacturers. We can also install downdrafts purchased from Home Depot, Lowes, Best Buy, or online retailers.

Q: Do you handle disposal of my old downdraft system?
A: Yes! For $25, we will haul away your old downdraft system and take it for proper recycling. This is optional but highly recommended for complete service.

Q: Can you change my venting direction from inside to outside?
A: Changing venting direction from recirculating inside to ducted outside, or vice versa, is not included in standard installation. This requires additional ductwork installation and is available at additional cost ($200-500+ depending on complexity).

Q: What CFM ratings do telescopic downdrafts offer?
A: Most telescopic downdrafts offer 300-600 CFM ventilation. Higher-end models may offer up to 800-1000 CFM. We test CFM performance during installation to verify proper ventilation.

Q: Is a dedicated electrical circuit required?
A: Yes, telescopic downdrafts require a dedicated 110V electrical circuit (typically 15-20 amp). They cannot share circuits with other appliances due to motor power requirements.

Q: Will the downdraft fit my existing countertop opening?
A: Downdrafts vary in width (typically 12 inches, 15 inches, or 30 inches). If your existing opening does not match, we can modify the countertop (additional charge). Granite, quartz, and solid surface countertops require professional cutting.

Q: How high does the telescopic downdraft rise?
A: Most telescopic downdrafts rise 8-14 inches above the countertop when activated. Height varies by model. Ensure adequate clearance behind cooktop.

Q: Can downdrafts be installed with gas cooktops?
A: Yes, telescopic downdrafts work with gas, electric, and induction cooktops. However, they are less effective than overhead hoods for gas cooking due to natural heat rise. Higher CFM models perform better.

Q: Do I need ductwork for a telescopic downdraft?
A: Most downdrafts can operate in two modes: ducted (outside venting) for best performance, or recirculating (inside venting with filters) where ductwork is not available. Ducted operation is preferred.

Q: Is a permit required for downdraft installation?
A: Most jurisdictions in the Atlanta metro area do not require permits for simple downdraft replacement. However, if ductwork modifications or new electrical circuits are needed, permits may be required. We handle all permit requirements.

Expert Telescopic Downdraft Installation Throughout:
Gwinnett County (Lawrenceville, Duluth, Suwanee, Buford, Norcross)
DeKalb County (Decatur, Dunwoody, Tucker, Stone Mountain)
Cobb County (Marietta, Smyrna, Kennesaw, Acworth)
Fulton County (Atlanta, Alpharetta, Sandy Springs, Roswell, Johns Creek)
Forsyth County (Cumming)

Services: Telescopic downdraft installation, replacement, ductwork connection, removal, haul away
Brands: Wolf, Thermador, Jenn-Air, KitchenAid, Best by Broan, and all major brands
Call today: (678) 656-9246
Email: arcitechlogistics@gmail.com
Licensed - Insured - Professional Telescopic Downdraft Installation Specialists Serving Atlanta Metro Since 2015