Expert Door Hardware Installation & Replacement Services | Atlanta's Trusted Professionals

Entry Door Hardware: Keyed entry handlesets, deadbolt combinations, smart locks with keypads, double cylinder deadbolts, handleset with decorative trim

Interior Door Hardware: Privacy locks (bed/bath), passage sets (hall/closet), dummy handles (double doors), pocket door hardware

Commercial Hardware: Panic exit devices, electromagnetic locks, access control card readers, commercial-grade closers, ADA-compliant lever handles

Security Hardware: High-security deadbolts (ANSI Grade 1), security strike plates with long screws, door reinforcement plates, security hinges with non-removable pins, door armor protection systems

Smart Lock Installation: Wi-Fi and Bluetooth smart locks, app-controlled entry, keypad deadbolts, biometric locks, home automation integration (Alexa, Google Home, Apple HomeKit)

Specialty Hardware: French door hardware, sliding door locks, barn door hardware, door closers, kick plates, hinges, peepholes, door stops, security chains

On-site door and hardware assessment
Old hardware removal and disposal
New hardware installation (handles, deadbolts, locksets)
Strike plate installation with long security screws
Latch and deadbolt alignment and adjustment
Door alignment verification
Hardware lubrication and function testing
Lock and key testing from both sides
Complete operational walkthrough with client
Work area cleanup and debris removal
Key organization and labeling
Care and maintenance instructions

Standard Backsets: 2-3/8" (interior doors) or 2-3/4" (exterior doors)
Standard Cross Bore: 2-1/8" diameter
Standard Edge Bore: 1" or 7/8" diameter
Door Thickness: 1-3/8" (interior) or 1-3/4" (exterior); special hardware for non-standard thicknesses
Handle Height: 36-38" from floor (residential); 34-48" (ADA commercial, max 48")
Deadbolt Position: Typically 5-6" above handle center
Deadbolt Throw: Minimum 1" for security; Grade 1 hardware tested to 10 strikes at 75 ft-lbs
ANSI Grade 1: 1,000,000 cycle test; commercial/high-security applications
ANSI Grade 2: 500,000 cycle test; residential/light commercial
ANSI Grade 3: 200,000 cycle test; basic residential
Strike Plate Screws: 3" screws recommended for security (into door frame stud)
Smart Lock Batteries: Typically 4x AA batteries; 6-12 month battery life depending on usage

Phase 1 - Assessment & Planning: Schedule consultation, conduct on-site door assessment, identify hardware requirements, discuss security needs and style preferences, measure door prep (backset, bore holes), assess door condition and alignment, verify handing, check ADA requirements, review smart lock options, photograph existing hardware, provide written estimate, obtain client approval.

Phase 2 - Hardware Procurement & Preparation: Order selected hardware, verify components, prepare installation tools (drill, hole saws, chisels, templates), organize hardware by door, review manufacturer instructions, prepare door surface, plan installation sequence.

Phase 3 - Old Hardware Removal: Photograph existing hardware, remove interior/exterior handles, remove latch assembly, remove deadbolt, remove strike plates, remove hinges (if replacing), inspect bore holes, clean all openings, assess door alignment, make necessary repairs to damaged holes or mortises.

Phase 4 - New Hardware Installation: Verify new hardware fit, install latch mechanism, install exterior and interior handles/levers, test handle operation, tighten all screws, install deadbolt, install strike plates with long security screws, test door latching, install hinges (if replacing), install door closer (if applicable), install kick plate and door stops, lubricate all moving parts.

Phase 5 - Smart Lock Installation (if applicable): Verify compatibility, install mechanical components, install batteries, connect wire harness, power on and initialize, download and configure app, pair with smartphone, program user codes, configure home automation integration, set auto-lock, configure activity logging, test all features, demonstrate to client.

Phase 6 - Final Inspection & Client Walkthrough: Comprehensive function test of all doors, check all screws, verify finish consistency, test door alignment, clean work areas, organize and present keys, complete client walkthrough, provide care instructions, review security best practices, photograph completed installation, provide written documentation.

Purchase or have hardware ready before appointment (handles, deadbolts, smart locks)
Know your door handing (stand outside - if hinges are on left = left-hand door)
Measure backset if replacing hardware (standard: 2-3/8" or 2-3/4" from door edge to bore center)
Decide on finish (satin nickel, oil-rubbed bronze, matte black, polished brass, chrome)
For smart locks: charge your phone and have your Wi-Fi password ready
Gather any existing keys you want to match or provide for rekeying
Secure pets in another room during installation
Ensure parking is available for our technician's vehicle
Clear space around doors that will be serviced

Handle operation test: Turn handle from both sides—should operate smoothly with no binding or sticking
Latch test: Latch should retract fully when handle is turned and return when released
Deadbolt test: Should extend and retract smoothly, full 1" throw, no binding
Door latching test: Close door slowly—latch should engage strike plate smoothly without resistance
Key test: Key should insert and turn smoothly from both sides, remove easily
Deadbolt alignment test: Deadbolt should align perfectly with strike plate opening
Smart lock test (if applicable): Test all codes, app control, auto-lock, voice control, and remote access
Operation count: Open and close each door 10+ times to verify consistent smooth operation
Screw tightness check: Verify all mounting screws are secure with no loose components
Finish inspection: Check all hardware finishes match and are free from scratches or damage

Atlanta, Marietta, Roswell, Sandy Springs, Alpharetta, Johns Creek, Milton, Cumming, Dunwoody, Brookhaven, Decatur, Tucker, Stone Mountain, Lithonia, Snellville, Lawrenceville, Duluth, Suwanee, Buford, Sugar Hill, Flowery Branch, Gainesville, Smyrna, Mableton, Kennesaw, Acworth, Woodstock, Canton, Holly Springs, East Point, College Park, Union City, Fairburn, Peachtree City, Fayetteville, Tyrone, Newnan, Douglasville, Villa Rica, Dallas, Hiram, Powder Springs, Austell, Conyers, Covington, Loganville, Monroe, Winder, and surrounding communities throughout the Atlanta Metro Area.

Q: How much does door hardware installation cost?
A: Basic interior handle installation is $50-75 per door. Entry handleset installation runs $100-150. Deadbolt installation (existing prep) is $75-100. New bore/prep required adds $50-100 per door. Smart lock installation is $150-250. Commercial hardware is $150-300+. Rekeying is $15-25 per cylinder. Hardware costs are additional. Free estimates provided.

Q: Can you match new hardware to my existing keys?
A: Yes! We can rekey new locks to work with your existing keys (same brand/keyway). This allows one key to operate all doors. We can also rekey all locks to a master key system.

Q: What's the difference between ANSI Grade 1, 2, and 3 locks?
A: Grade 1 is highest security (commercial), Grade 2 is residential/light commercial, Grade 3 is basic residential. We recommend Grade 1 for exterior doors and Grade 2 for high-use interior doors.

Q: Should I choose knobs or lever handles?
A: Levers are generally better—easier to operate, ADA compliant, safer in emergencies, and more modern looking. Knobs provide a traditional look but are harder to use.

Q: What's a smart lock and do I need one?
A: Smart locks offer keyless, app-controlled entry with remote locking, temporary codes, activity logs, voice control, and auto-lock. Great for families, rentals, and vacation homes.

Q: Can door hardware be installed without drilling new holes?
A: Often yes, if new hardware matches existing backset (2-3/8" or 2-3/4") and existing bore holes are standard size. We assess existing prep and recommend compatible hardware.

Q: How do I choose the right hardware finish?
A: Coordinate with other fixtures. Satin nickel is modern and versatile. Oil-rubbed bronze is traditional. Matte black is contemporary. Polished brass is luxurious. Consider durability and maintenance needs.

Q: Should I rekey or replace locks when moving into a new home?
A: Rekeying is usually sufficient and more economical ($15-25 per lock vs. $50-200+ for replacement). Replace if locks are damaged, outdated, or you want smart lock upgrades.

Q: What's a backset and why does it matter?
A: Backset is the distance from door edge to bore hole center. Standard is 2-3/8" (interior) or 2-3/4" (exterior). New hardware must match existing backset or new holes must be drilled.

Q: Do you offer commercial door hardware services?
A: Yes! We install panic exit devices, access control, commercial locks and closers, master key systems, ADA hardware, and card reader systems for offices, retail, schools, and healthcare.

Ready to upgrade your door hardware or enhance your home security? Contact Arcitech Logistics LLC today for professional door hardware installation throughout the Atlanta Metro Area. Call or text (678) 656-9246, email arcitechlogistics@gmail.com, or book online. We offer free estimates, same-day service availability, and flexible scheduling Monday through Saturday 8am-6pm. Whether you need one handle replaced or an entire home hardware refresh, we deliver precise installation and lasting security.